Conductive

Signal amplifier for conductive level control in liquids from 10-250 µS, with 1- or 2-channel versions, SPDT relay output, front LED alarm display and DIN rail mounting.

Signal amplifier family for conductive level control in liquids from 8 or 10 µS, with SPDT relay outputs, adjustable sensitivity, DIN rail mounting and optional delay adjustment on VNR 23M.

Conductive level probe for liquid level control from 1 µS conductivity. It works with VNR21.22 control units and offers up to 4 coated electrodes, 500, 1000 or 1500 mm lengths, IP65 protection and DIN 43650 output.

Conductive level sensor for liquid level control with built-in electronics. It measures conductivity from 1-10 µS or 10-60 µS, provides SPDT relay output, supports SLC-10 and SLC-50 versions and uses AISI 316 electrodes.

Conductive level relay for liquid limit detection in water, alkalis and acids, with 20...253 V AC/DC supply, adjustable sensitivity, up to 8 s switching delay and line break monitoring.

Conductive leakage electrode for leak monitoring of electrically conductive liquids from 1 µS/cm, for floor mounting in bunds, raised floors and cooling channels, with optional line break monitoring.

Conductive leakage sensor for floor-mounted leak monitoring of electrically conductive liquids, with integrated electronics, adjustable sensitivity, PNP or relay output and AC/DC supply options.

Conductive rod probe for multipoint level detection in conductive liquids from 1 µS/cm, with up to 7 rods, -40 °C to +150 °C medium temperature, -1 to 10 bar pressure and ATEX option.

Conductive rod probe for hygienic level detection in conductive liquids from 1 µS/cm, with up to 4 rods, ETFE insulation, -40°C to +130°C medium temperature and 20 bar pressure stability.

Conductive rod probe for multipoint level control in conductive liquids from 1 µS/cm, with up to 5 rods, metal thread, -15°C to +150°C medium temperature, IP65 protection and 20 bar pressure stability.

Thermowell for Pt100 temperature sensor installation, with stainless steel 1.4571 construction, 4 to 11 mm inner diameters, 100 bar or 500 bar pressure stages and configurable lengths.

Conductive electrode relay for Ex-area level control in conductive liquids such as water, alkalis and acids, with ≤ 200 kΩ or ≥ 5 µS/cm range, two relay outputs and 20...253 V AC / 20...125V DC supply.

Conductive level switch for industrial liquid vessels, detecting one or two limit levels in liquids from 5 µS/cm, with -40 °C to +100 °C process temperature, ingress protection (IP65) and relay or PNP output.

Conductive level switch for food liquid applications, detecting one or two limit levels in liquids from 5 µS/cm, with FDA listed ETFE insulation, EPDM seals, ingress protection (IP65) and relay or PNP output.