Accessories

Supporting components are just as critical as the sensors themselves. Our accessories range from passive radiation shields and ventilation units to smart sensor hubs and mounting hardware, ensuring that your instruments remain accurately calibrated and fully operational under any outdoor conditions. This allows you to reduce installation effort and maintain consistent data quality across your entire meteorological monitoring infrastructure.
View all products
Cables
Fixing & Protection

56 Products

Ventilation and heating unit for pyranometers VUP12

Ventilation and heating unit for pyranometers, compatible with LPS02... and LPS10... sensors, with 12 Vdc ventilation, two 12 Vdc heating circuits and 8-pole M12 connection.

Radiation shield for outdoor temperature and humidity sensors HD9007A

Radiation shield for outdoor temperature and humidity sensors, 12 or 16 rings with 125 mm diameter, natural ventilation design and mast mounting for 30 to 50 mm poles.

Heating and ventilation unit for solar radiation sensors HD9906

Heating and ventilation unit for solar radiation sensors, supporting pyranometers, pyrgeometers and radiometers outdoors with 12 Vdc fan, 12 Vdc heater and 5 m cable.

Radiation shield for outdoor temperature/humidity probes HD9007S

Radiation shield for outdoor temperature/humidity probes, with 14 mm probe diameter suitability, UV-resistant ASA discs and mast mounting for 30 to 50 mm poles.

Tripod for environmental sensor installation, anodised aluminium HD2005.20

Tripod for environmental sensor installation with anodised aluminium construction, adjustable telescopic legs and two versions for max. heights of 225 cm or 335 cm. Fixes with screws or ground stakes.

5-pole cable for M12 actuator and sensor connections CPM12-5

Actuator and sensor cable for M12 connections, with 5-pin A-coded female connector, PUR shielded cable in 5 m, 10 m, 25 m or 50 m lengths, 60 V and 4 A rating, and ingress protection (IP67 and IP69K).

Bird spikes for HD2013.3 series rain detectors HD2013.2D

Bird spikes for HD2013.3 series rain detectors, with 6 spikes Ø 3 mm and 60 mm height. Factory installation required; order with the unit.

Flange support for vertical probes, 125 or 250 mm wall distance HD9008.21

Flange with support for vertical probes, with Ø 26 mm support, Ø 14 mm hole and 125 mm or 250 mm distance from the wall.

Wall flange for combined °C and R.H. probes HD9008.31

Wall flange for combined °C and R.H. probe installation, available with Ø 14 cable outlet or with gland for fixing Ø 12 mm probes.

Base with levelling device for LP...01 probes LPBL

Base with levelling device for LP...01 probes, supporting defined probe positioning during compatible light measurement setups.

12-pole cable with 8-pin M12 connector and open wires CP18

12-pole cable for LPSD18, HD2016 and HD9408.3B, with an 8-pin M12 connector on one end and open wires on the other. Available as 5 m CP18.5 or 10 m CP18.10.

Shielded cable for HD2003 3-axis ultrasonic anemometers CP2003

Shielded cable for HD2003 anemometers, with 26-pole watertight connector, open wires, 8 mm diameter and 5 m or 10 m lengths for CP2003/5 and CP2003/10.

Connection cable for rain detectors CP2013

Connection cable for HD2013.3 rain detectors, with an 8-pole watertight connector on one end and free wires on the other. Available in 5 m and 10 m lengths.

Rain gauge cable for data logger connection CP2013-DB

Rain gauge cable for connecting a rain gauge to the HD2013-DB data logger, with 1 m length, 4-pole M12 female connector on one side and open wires on the other.

PC connecting cable for pyranometer configuration CP24B

PC connecting cable for pyranometer configuration with built-in RS485/USB converter, 5-pole or 8-pole M12 sensor connector and A-type USB connector for the PC.

Serial connection cable for data logger PC connection CP25

Serial connection cable for data logger PC connection with built-in USB/RS232 converter, USB connector on the PC side and 8-pole M12 female connector on the instrument side.

You have seen 16/56 products