DX (Digital)

With calibration data stored directly in the probe, our digital Pt100 temperature probes are fully interchangeable and ready for immediate use. Simply connect the probe and start taking measurements. The integrated digitising electronics convert the sensor signal at source, mensuring high accuracy across the full measuring range. Designed for use with DX-compatible instruments, they offer unparalleled capability across a wide temperature range while guaranteeing the highest level of accuracy.
View all products

7 Products

Digital Pt100 probe for portable temperature measurement DX 11X

Digital Pt100 probe for portable temperature measurement with thin film or wire wound Pt100 sensors, -196...500 °C depending on variant, 0.01 °C resolution, M12 connection (DX) and stored calibration data.

Economical digital temperature probe for DX PRO-Line handheld meters DX 12X

Digital temperature probe for PRO-Line handheld meters, measuring -50 ... +250 °C with 0.1 °C resolution. Pt1000 thin-film sensor, DX-sensor interface M12 and IP67 protection support portable water and field measurements.

Digital indoor air quality (IAQ) probe for handheld meters DX 330

Digital indoor air quality probe for temperature, RH, CO2, pressure and VOC index measurement, with -20...+80 °C range, 0...5000 ppm CO2 range, M12 connection and factory calibration.

Digital temperature and humidity probe for handheld meters DX 31X

Digital temperature and humidity probe for PRO handheld meters, measuring 0…100% RH and temperature up to +125 °C or +160 °C, with 0.01 resolution, calculated humidity quantities and M12 connection.

Digital optical dissolved oxygen sensor for field water monitoring DX 530

Optical dissolved oxygen sensor for field water monitoring, measuring 0.0 … 200.0 % O2 sat, 0.00 … 20.00 mg/l and 0.0 … 45.0 °C with DX interface, IP68 protection and detachable M12 cable.

Digital optical dissolved oxygen sensor for field water monitoring incl. level DX 532

Optical dissolved oxygen sensor for field depth profiles, measuring 0.0 ... 500.0 % O2 sat and 0.00 ... 50.00 mg/l with hydrostatic depth measurement, IP68 protection and digital DX interface.

Digital optical dissolved oxygen sensor for laboratory water monitoring, Ø12 mm DX 535

Optical dissolved oxygen sensor for lab and near-surface water, measuring 0.0 ... 500.0 % O2 sat and 0.00 ... 50.00 mg/l with Ø12 mm shaft, IP67 protection and digital DX interface.

You have seen 7/7 products