Isolating amplifier

ST500 / TV500

Isolating signal converter for process control signals, converting 0/4 ... 20 mA or 0/2 ... 10 V DC inputs to selectable current and voltage outputs. 22.5mm DIN rail case, 3-port isolation and ST500 transmitter supply.
Product Inquiry

Selected product option for Isolating amplifier. All information below applies to the selected product option.

Isolating converter with transmitter supply Power feed signal converter for process control signals, converting 0/4 ... 20 mA or 0/2 ... 10 V DC inputs to selectable outputs. Includes approx. 24 V DC isolated transmitter supply and 3-port isolation.
Isolating Signal Converter Isolating signal converter for process control signals, converting 0/4 ... 20 mA or 0/2 ... 10 V DC field inputs to selectable current and voltage outputs. 22.5mm DIN rail case, 3-port isolation and power-on LED.

Introduction

Clean signal conversion helps process control systems work with dependable standard values from the field. TV500 isolates and converts 0/4 ... 20 mA or 0/2 ... 10 V DC input signals into industry standard outputs for control applications.
 
Front DIP switches allow quick selection of current or voltage ranges on site. The output can be configured for 0/4 ... 20 mA and 0/2 ... 10 V, with voltage output available simultaneously to the current output. A max. current output burden of 1 kΩ supports direct control of I/P transmitters and 20 mA proportional valves.
 
Full 3-port isolation separates input, output and supply, reducing unwanted interaction between connected circuits. The 22.5mm DIN rail case fits compact cabinet layouts, with supply voltage options of 100 ... 265 V AC or 10.8 ... 30 V AC/DC. Measuring range 10 offers T90 <20 ms, while measuring range 11 offers T90 <100 μs.

Flexible conversion
Flexible conversion
Switch selectable 0/4 ... 20 mA and 0/2 ... 10 V DC inputs and outputs.
Clean separation
Clean separation
Full 3-port isolation separates input, output and supply.
Direct actuator use
Direct actuator use
Current output supports max. 1 kΩ burden for I/P transmitters and 20 mA valves.
Sensor feed included
Sensor feed included
ST500 provides an integrated approx. 24 V DC transmitter supply.

Features

Switch selectable inputs

The input range is configured on the front panel for 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V DC or 2 ... 10 V DC.

Current and voltage outputs

The output can be selected for 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V or 2 ... 10 V, with current and voltage output available simultaneously.

Transmitter supply

ST500 versions provide a fully floating isolated transmitter supply for connected field devices.

Supply voltage variants

Versions are available for 100 ... 265 V AC or 10.8 ... 30 V AC/DC auxiliary voltage.

Response time options

Measuring range 10 provides T90 <20 ms. Measuring range 11 provides T90 <100 µs for faster signal transmission.

Adjustment controls

The measuring range and 4mA/2V value can be adjusted by approx. +/-5% using front panel controls.

DIN rail housing

The device uses a 22.5mm polycarbonate case for TH35 DIN rail mounting, with housing IP30 and terminals IP20.

Product inquiry

All fields marked with * are required. Product specific information are filled in automatically.

Drag files here or

PDF, PNG or JPG file, in total max. 20 MB

Please check the automatically filled product information before sending your inquiry. Attaching relevant documents helps us process your request faster.

Similar Products

Isolating signal converter with integrated transmitter supply ST500EX / TV500EX

Power feed signal converter for Ex-area field signals, handling 0/4..20 mA and 0/2..10 V DC inputs and outputs with approx. 20 V DC transmitter supply, ATEX approval and DIN rail mounting.

Isolating signal converter for unipolar and bipolar signals TV500L

Isolating signal converter for unipolar and bipolar field signals, converting 0/4..20 mA, 0/2..10 V, ±20 mA or ±10 V DC with full 3-port isolation and selectable increasing or decreasing output.

Loop-powered isolating converter TV500P

Loop-powered isolating converter for standard analog signals, adapting 0..20 mA, 4..20 mA, ±20 mA, 0..10 V, 2..10 V or ±10 V inputs to a passive 4..20 mA output.

Loop-powered signal isolator TW500

Loop-powered signal isolator for 0(4)..20 mA DC signals, isolating current loops without a separate power supply in 1-, 2- or 3-channel versions within a 22.5 mm DIN rail housing.