Flow measurement in food technology, chemical and pharmaceutical production or water technology needs a converter that adapts to the sensor already installed. This device measures flow from pulse flow sensors, shows the value on a two-line LCD and converts it into a loop-powered 4 ... 20 mA output for evaluation or control.
Commissioning stays practical on site. The measuring range and unit are programmable, with flow displayed from -99999 ... 99999 digit and units such as l/min, m³/h or (US)gal/min. Coil, Namur, NPN, PNP and Hall sensor signals are supported, and model type 2 adds a second input for addition or subtraction.
For quantity-based processes, programmable totalizers and two electronic alarm outputs support monitoring and dosing. A pulse output is available for external summation, while the IP65 polyamide field case and -10 ... 55 °C operating range suit typical industrial installation areas.
The keypad provides access to device configuration, including sensor type, measuring range, units, totalizer settings, alarms, pulse output and 4 ... 20 mA adjustment.
The LCD dot matrix display shows flow values, totalizers and output states. It has 2 lines with 16 characters each and 4.9 mm character height.
The device provides a daily totalizer that can be reset manually and an overall totalizer with zero-voltage protection. Totalizer access can be locked by numeric code.
Model type 2 includes an additional measuring input. The inputs can be configured for addition or subtraction.
A manual simulation mode generates a flow-rate value within the programmed measuring range for checking the process output.
Screw terminals accept 2.5 mm² flexible conductors or 4 mm² wire. Sensor and output terminals are arranged inside the field case.
