Selected product option for Digital Pt100 probe for portable temperature measurement. All information below applies to the selected product option.
Reliable temperature checks in the field start with a probe that is ready when you are. DX 111 supports portable immersion and insertion measurements with a thin film Pt100 sensor, giving users a practical balance of accuracy, response speed and robust handling for daily professional work.
The probe is factory-calibrated and stores its calibration data internally, allowing it to be exchanged without adjustment on compatible PRO D01 / PRO D05 handheld meters and similar DX-input instruments. A 3 s response time, 0.01 °C resolution and ±0.1 °C accuracy from 0 °C to 100 °C help deliver dependable readings across a measuring range of -50 … 250°C.
Built for demanding use, DX 111 combines an AISI 316 stem, ergonomic PA6-GF30 handle and ingress protection (IP67). The integrated digitizing electronics use 4-wire technology and thermo-voltage compensation to minimize temperature effects, while immersion, insertion and surface versions support typical portable measurement tasks.
The family includes thin film Pt100 sensors for DX 111 versions and wire wound Pt100 sensors for DX 115 versions.
Available designs include 3 mm immersion and insertion probes, a bendable mineral-insulated immersion probe and a Ø6 mm surface probe.
Digitizing electronics are integrated in the connector body and include 4-wire technology with thermo-voltage compensation.
The probes can be adjusted in two points by offset and slope, or by setting R0 and Callendar-Van Dusen parameters.
Each probe uses a 4-pole M12 connection with PVC cable lengths of 1, 2 or 5 m.
The DX 111-S6 version uses a silver contact surface and a rigid 4 mm probe stem for surface temperature measurement.
