Temperature campaigns with several measuring points become easier to document when all channels are handled in one instrument. With eight thermocouple inputs, this data logger captures, records and transfers readings from connected probes, while the backlit LCD shows the active inputs in clear groups of four.
Adapt the instrument to the probes you already use: it works with thermocouples K, J, T, N, R, S, B or E, with one type selected for the measuring phase. Manual MEM logging or programmed start and stop times give you control over short checks and longer monitoring tasks.
For clear follow-up work after the measurement, up to 64 LOG sessions and 800,000 recordings can be stored across connected inputs. Data moves to a PC through USB 2.0 or RS232 for DeltaLog9 display, and RS232 also supports real-time output to an 80-column serial printer.
The HD32.8.8 uses eight thermocouple inputs with standard miniature connectors and detects connected probes at turn-on.
The logging interval is common to all probes and can be set to fixed values from 2 seconds to 1 hour.
The interface can show °C, °F or °K, plus maximum, minimum, average and REL values for displayed temperatures.
The Log File Manager allows stored sessions to be printed, erased or managed with circular or until-memory-full behavior.
The user password protects the keyboard against unauthorized access while preserving MEM access for data capture.
Downloaded data can be displayed on a PC as tables or graphs using DeltaLog9 software.
