Sliding hammer electrode for material moisture measurement

GHE 38

Sliding hammer electrode for material moisture measurement, used to drive Ø 2.5 mm steel pins without auxiliary tools.
Order Code:
GHE38-GE
Article Number:
483743
Product Inquiry

Introduction

For material moisture checks that require firm pin contact, driving pins cleanly into the material can be part of getting a usable reading. This sliding hammer electrode is designed as an impact electrode for inserting Ø 2.5 mm steel pins without additional auxiliary tools.
 
The GHE 38 supports material moisture measurement with a robust, direct handling approach for compatible measurement setups. The GMK 38 measuring cable is required for connection, keeping the electrode integrated into the specified accessory system.

Direct pin insertion
Drives Ø 2.5 mm steel pins into the material without auxiliary tools.
Impact electrode use
Hammer electrode design supports firm pin contact for material moisture checks.

Features

Hammer electrode

The product is a slide hammer electrode used as an impact electrode for material moisture measurement.

Steel pin insertion

The electrode is designed to drive Ø 2.5 mm steel pins into the material without auxiliary tools.

Cable requirement

The GMK 38 measuring cable is required to connect the electrode to the measurement setup.

Product inquiry

All fields marked with * are required. Product specific information are filled in automatically.

Drag files here or

PDF, PNG or JPG file, in total max. 20 MB

Please check the automatically filled product information before sending your inquiry. Attaching relevant documents helps us process your request faster.