Type K handle probe for gases and air up to 550 °C

GF 1TK-L3

Mini flat-pin plug, 1 m cable, Type K gas and air probe for temperature checks in gases, -65 ... +400 °C probe tip range, Ø3 mm AISI 316 sheath, Class 1 accuracy, 1 m silicone cable and miniature flat pin plug.
Order Code:
GF1TK_L3
Article Number:
611299

Introduction

High gas and air temperatures need a probe that reacts quickly without becoming bulky at the measuring point. This compact Type K probe measures up to +400 °C at the probe tip, with a miniaturized Ø3 mm sensor design and open construction for a response time of approx. 15 s in air at 2 m/s.

The stainless steel AISI 316 sheath supports use where material resistance and continuous food contact suitability matter. A compact silicone pen-type handle withstands up to +250 °C, while the 1 m silicone cable is specified for permanent use up to +230 °C and short-term use up to +250 °C.
 
With Class 1 accuracy derived from DIN EN 60584-1:2014-07 and a miniature flat pin plug, the probe fits Type K thermocouple instruments such as ECO 130 and PRO 131. It is a practical choice for fast gas and air temperature checks in demanding temperature environments.

High heat range
Measures gases up to +400 °C at the probe tip for high-temperature checks.
Fast response
Ø3 mm open sensor design reaches T90 in approx. 15 s in air at 2 m/s.
Heat-ready handle
Silicone pen-type handle withstands temperatures up to +250 °C.
Minaturized construction
Only Ø3 mm allow access to ven small areas and guranties best possible reaction time.

Features

Type K sensor element

The probe uses a Type K thermocouple element for connection to compatible thermocouple instruments like ECO 130 or PRO 131/135

Silicone handle and cable

The probe has a compact silicone handle and a 1 meter silicone cable specified for high operating temperatures. No damage by touching hot surfces up to 250°C.

Details