Pt1000 insertion probe for gases, liquids and soft materials

AX 121-I

Pt1000 insertion probe for temperature measurement in gases, liquids and soft materials, with -50 … +250 °C or -200 … +600 °C ranges, Ø 3 mm stainless steel stem with cold formed tip, IP67 protection and BNC, banana plug or loose-end connection.
Product Inquiry

Introduction

Reliable temperature measurement starts at the contact point. This probe family gives technicians a precise, easy-to-handle Pt100 solution for immersion and insertion tasks in gases, liquids and soft materials, including applications with continuous food contact, giving users a dependable solution for reference instruments such as the ECO 120.
 
The AX 121-I uses a thin film Pt100 sensor for fast, economical measurement. Depending on the configuration, measuring ranges cover -50...+250 °C, -50...+400 °C, with tolerance classes from B to AA and 1/10 B.

Designed for demanding handling, the AX 121 uses an ergonomic polyamide handle rated up to 120 °C and is water-protected according to IP67. Connection options include BNC-connector, 2 x banana plugs or loose ends with wire end ferrules, with optional ISO 9001 or DAkkS-/ACCREDIA accredited calibration ISO/IEC 17025 when combined with a suitable display instrument.

Fast checks
T90 response time is under 2 s in water
Ergonomic large handle
Comfortable Insertion into media. High operating temperature up to 120 °C of handle and gland.
Food compatible
Corrosion and temperature resistant stainless steel stem, suitable for continuous food contact.
Water protected
IP67 protection supports professional use in demanding measurement tasks - while easy to clean
Pt1000 BNC version
Ideal quick connect probe for instruments like ECO 120, special design: water proof when connected.

Features

Pt1000 thin film sensor

The probe uses a 2-wire Pt1000 thin film sensor for analog temperature measurement with suitable reference instruments.

Accuracy classes

Versions are available in tolerance classes B and AA according to IEC 751 and EN 60751 applicability limits

Connection versions

Cable termination options include BNC-connector or loose ends with wire end ferrules.

Calibration options

The probe can be supplied with ISO 9001 or DAkkS-/ACCREDIA accredited calibration ISO/IEC 17025 when combined with a suitable display instrument.

Product inquiry

All fields marked with * are required. Product specific information are filled in automatically.

Drag files here or

PDF, PNG or JPG file, in total max. 20 MB

Please check the automatically filled product information before sending your inquiry. Attaching relevant documents helps us process your request faster.