Precision analog Pt100 4-wire insertion probes, large handle

AX111-I3-AA-150-L01-P-M12

Pt100 insertion probe for precision temperature measurement in soft materials (food etc), gases and liquids with -50 up to +400 °C variants, Ø3 mm stainless steel stem, IP67 protection. 4 wire analog connection with M12, Mini-DIN or loose ends
Order Code:
AX111-I3-AA-150-L01-P-M12
Article Number:
486830
Product Inquiry

Introduction

Reliable temperature measurement starts at the contact point. This probe family gives technicians a precise, easy-to-handle Pt100 solution for immersion and insertion tasks in gases, liquids and soft materials, including applications with continuous food contact.
 
The AX 111-I uses a thin film Pt100 sensor for fast, economical measurement, while the AX 115-I uses a wire wound Pt100 sensor for highest precision demands. Depending on the configuration, measuring ranges cover -50...+250 °C, -50...+400 °C or -100...+400 °C, with tolerance classes from B to AA and 1/10 B.
 
Built for professional daily use, the Ø3 mm rigid stem is made from corrosion and temperature resistant AISI 316L stainless steel, with an ergonomic handle rated up to 120 °C. IP67 protection, optional molded handle for permanent underwater operation and connection options including M12, Mini-DIN or loose ends make the probes easy to integrate into demanding field and laboratory workflows.

Ergonomic large handle
Comfortable Insertion into media. High operating temperature up to 120 °C of handle and gland.
High accuracy Pt100
High precision 4 wire Pt100 wire wound sensors choice AX115-I3 for tolerance classes up to 1/10 B
Food compatible
Corrosion and temperature resistant stainless steel stem, suitable for continuous food contact.
Water protected
IP67 protection supports professional use in demanding measurement tasks - while easy to clean
Fast response
Precision readings within short time down to T90 < 2 s in water at 0.4 m/s
Robust cold formed tip
Ultra rigid for frequent insertion in demanding media

Features

Choice of several sensor elements

The AX 111-I versions use thin film Pt100 sensors. The AX 115-I versions use wire wound Pt100 sensors for highest precision demands.
A wide choice of class B, A, AA or 1/10 B ensures best support for specific measuring tasks considering cost and performance aspects.

Reference class for calibrated systems

The probes can be supplied with ISO 9001 or DAkkS-/ACCREDIA accredited calibration according to ISO/IEC 17025 when used with a suitable display instrument, e.g PRO 111 od PRO 115.

Cable and connector options

Cables are available in 1 m, 2 m or 5 m PVC versions, with M12 4-pole male connector, Mini-DIN 4-pole connector or loose ends.

Flexible connection

Choose M12, Mini-DIN or loose ends for 4-wire Pt100 instruments (e.g. M12 for PRO 111 / PRO 115)

Details

Drawing for standard 1m M12 variants

Product inquiry

All fields marked with * are required. Product specific information are filled in automatically.

Drag files here or

PDF, PNG or JPG file, in total max. 20 MB

Please check the automatically filled product information before sending your inquiry. Attaching relevant documents helps us process your request faster.