Pressure Probes for Portable Manometers

TP704-500BAI

Pressure probes for portable manometers measure relative or absolute pressure from 100 mbar to 500 bar, with ¼ BSP connection, 8-pole DIN 45326 connector and AISI 316/VITON wetted parts.
Order Code:
TP704-500BAI
Article Number:
VTP704-500BAI
Product Inquiry

Introduction

Pressure checks across broad industrial ranges need probes that match the instrument, the process connection and the pressure task. The TP704 family supports portable manometer measurements for relative and absolute pressure, with full-scale ranges from 100 mbar up to 500 bar.
 
The design is built for direct use at the measuring point. A male ¼ BSP connection supports process mounting, while surfaces in contact with the fluid use AISI 316 and a VITON O-Ring, combined with an AISI 304 housing. For measurement confidence, all TP704 probes feature 0.25 % f.s. accuracy from 20 to 25°C.
 
The probes connect to SICRAM input instruments via the PP471 module, keeping them practical for portable measurement setups. A dedicated KIT2104 set with ¼ BSPP fittings and gaskets is available for TP704 probes, helping adapt the family to common service and test connections.

Wide pressure span
Covers relative and absolute pressure ranges from 100 mbar to 500 bar.
Defined accuracy
0.25 % f.s. accuracy from 20 to 25°C supports dependable checks.
Process connection
Male ¼ BSP connection supports direct pressure measurement at the process.
Fluid-contact design
AISI 316, VITON O-Ring and AISI 304 housing support use at the measuring point.
Instrument link
PP471 connects TP704 probes to SICRAM input instruments.
BSPP kit option
KIT2104 provides ¼ BSPP fittings and gaskets for TP704 probes.

Features

Relative and absolute variants

The family includes relative pressure probes and absolute pressure probes.

Insulated membrane design

TP704 variants use an insulated membrane.

SICRAM module interface

All TP704 probes can be connected to the PP471 module for use with instruments with SICRAM input.

Process connection

TP704 probes use a male ¼ BSP connection for pressure connection to the measuring point.

Accessory fitting set

KIT2104 is available as a set of ¼ BSPP fittings and gaskets for TP704 series probes.

Product inquiry

All fields marked with * are required. Product specific information are filled in automatically.

Drag files here or

PDF, PNG or JPG file, in total max. 20 MB

Please check the automatically filled product information before sending your inquiry. Attaching relevant documents helps us process your request faster.