Lightning warning software, thunderstorm alerts and flash mapping

Lightning Works 300

Lightning warning software for BTD-300 and BTD-350 sensors, showing caution, warning and alert status with flash distances and directions. A server runs in the background, and up to five clients can connect over a network.

Introduction

Thunderstorms can build quickly, and an early warning changes what your team does next. Lightning Works 300 gives you that warning from a connected BTD sensor, which can warn of possible overhead lightning before the first flash occurs. Status changes are shown on a map centered on your installation, and an audible tone sounds when lightning is detected.
Several people can keep an eye on the same sensor. Up to five clients can monitor one BTD, from the server computer or remotely over a local network or the internet. Range bands for overhead, vicinity and distant activity are set by the administrator and overlaid on the map. Where a direction finder is fitted, each flash appears as a dot, so you can see where the storm is as well as how close it is.
Setup stays manageable. The server runs in the background as a service and starts with the computer, while the client and administrator tools install separately. Archived data exports as CSV, with one file per day. If the sensor sits at an unusual height or close to tall structures, a site correction factor lets you calibrate the reported distances against a known storm distance.