Indoor air quality monitor for HVAC checks, CO2 and CO

HD37AB1347

Indoor air quality monitor for HVAC and comfort checks, measuring CO2 0 ... 5000ppm, CO 0 ... 500ppm, RH, temperature and pressure with 67,600 recordings per input and RS232C/USB transfer.
Order Code:
HD37AB1347
Article Number:
VHD37AB1347
Product Inquiry

Introduction

Indoor air quality checks need clear evidence, especially in occupied spaces where ventilation, comfort and productivity are under review. With the P37AB147 SICRAM probe, the instrument measures CO2, CO, relative humidity, temperature and atmospheric pressure at the same time, giving technicians one portable setup for schools, offices, factories and other indoor environments.
 
For HVAC verification and building automation audits, it also calculates dew point, wet bulb temperature, absolute humidity, mixing ratio, enthalpy, % Outside Air and Ventilation Rate. The calculation procedure can use CO2 or temperature, supporting checks aligned with ASHRAE 62.1 and Legislative Decree 81/2008.
 
The data logger stores 67,600 recordings for each of the two inputs in 64 blocks, with selectable logging intervals from 15 seconds to 1 hour. A backlit 160x160 dot matrix display, IP65 protection and about 20 hours of battery autonomy make it practical for field work, while RS232C and USB interfaces support data transfer to a PC.

IAQ in one view
Measures CO2, CO, RH, temperature and pressure with the P37AB147 SICRAM probe.
HVAC checks
Calculates % Outside Air and Ventilation Rate using CO2 or temperature procedures.
Long field logging
Stores 67,600 recordings per input in 64 blocks, with intervals from 15 s to 1 h.
Site-ready handling
IP65 housing, backlit 160x160 display and 20 h autonomy support portable checks.
Flexible inputs
Accepts SICRAM humidity, temperature, hot-wire and vane air speed probes on two inputs.

Features

Calculated climate values

The instrument calculates dew point, wet bulb temperature, absolute humidity, mixing ratio and enthalpy from the measured humidity and temperature values.

Two SICRAM probe inputs

One input is dedicated to indoor air quality probes, while the second input accepts temperature and air velocity probes for hot-wire or vane measurements.

Programmable logging

Logging sessions can start and stop manually or by date and time. Stored files are organized in up to 64 blocks and can be managed from the instrument menu.

Air speed configuration

The menu allows selection of speed and flow rate units and entry of the section value used for flow rate calculation.

Statistical display

The FUNC key shows maximum, minimum and average values for the captured quantities and allows the statistical data to be reset.

Serial and USB interfaces

The instrument connects to a PC through RS232C or USB. The RS232C baud rate is selectable from 1200 to 38400 baud.

Product inquiry

All fields marked with * are required. Product specific information are filled in automatically.

Drag files here or

PDF, PNG or JPG file, in total max. 20 MB

Please check the automatically filled product information before sending your inquiry. Attaching relevant documents helps us process your request faster.