Field and lab conductivity checks become easier when one handheld meter covers the key values needed for routine water analysis. It measures conductivity, liquid resistivity, total dissolved solids (TDS) and temperature, with selectable display of χ, Ω, TDS, °C and °F.
The instrument supports combined 4-ring and 2-ring conductivity/temperature probes, as well as Pt100 and Pt1000 probes for temperature-only measurements. Automatic calibration can be performed with standard solutions of 147 µS/cm, 1413 µS/cm, 12880 µS/cm or 111800 µS/cm, helping users keep measurements consistent without a complex setup.
Built for portable work, the IP67-protected ABS housing withstands demanding measurement environments without adding bulk. The large LCD display, Max, Min and Avg functions, REL measurement, HOLD function and selectable automatic shut-off make the meter practical for regular checks, troubleshooting and documented comparison measurements.
The instrument works with combined 4-ring and 2-ring conductivity/temperature probes and Pt100 or Pt1000 temperature probes.
The display can show conductivity, liquid resistivity, total dissolved solids and temperature in °C or °F, depending on the connected probe and selected mode.
Conductivity measurement can use automatic or manual temperature compensation from 0 to 100 °C, with selectable αT from 0.00 to 4.00%/°C.
Probe calibration can be performed automatically with memorized standard solutions or manually with known conductivity solutions within the instrument limits.
The meter uses a 2x4½ digit LCD display with symbols, function indicators and direct keys for χ/TDS, °C/°F, calibration, REL and DATA functions.
The instrument runs on three 1.5V AA batteries and includes automatic power-off, which can be disabled when continuous operation is required.
