Portable pressure and temperature checks become easier when one compact instrument covers the main field tasks. The HD2304.0 measures absolute, relative and differential pressure through the PP471 module with TP704 and TP705 series probes, and temperature with Pt100 SICRAM or direct 4-wire Pt100 probes.
Technicians can work with the probe style that fits the application, including immersion, penetration, contact and air temperature probes. SICRAM probes store factory calibration data inside the module, so the instrument recognizes them automatically at start-up and reads the calibration information without user adjustment.
The clear LCD display supports routine measurement with Max, Min and Avg values, REL relative measurement, HOLD and a pressure ZERO key. IP67 protection, 200-hour battery autonomy and a 160 g ABS housing make the instrument practical for portable use in demanding environments.
The PP471 module connects the instrument to TP704 and TP705 series pressure probes.
The instrument accepts Pt100 probes with SICRAM module or direct 4-wire Pt100 probes.
Compatible Pt100 probes include immersion, penetration, contact and air versions.
Max, Min and Avg values are calculated during measurement and can be reset for a new session.
REL displays the difference from a stored value, while HOLD freezes the current reading.
The ZERO key performs zeroing for compatible pressure probes before measurement.
Pressure units include Pa, hPa, kPa, mbar, bar, atm, mmHg, mmH2O, kgf/cm2, PSI, inchHg and inchH2O.
| Measuring principle |
RTD
|
|---|---|
| Pressure type |
absolute, relative, differential
|
| Temperature range |
-200...+650 °C
|
| Resolution temperature |
0.1 °C
|
| Accuracy temperature |
±0.1 °C
|
| Temperature sensor |
Pt100
|
| Operating temperature |
-5...+50 °C
|
|---|---|
| Operating relative humidity |
0...90 %RH
|
| Condensation |
not permitted
|
| Storage temperature |
-25...+65 °C
|
| Degree of protection case |
IP67
|
| Dimensions |
88 mm x 38 mm x 140 mm
|
|---|---|
| Materials |
ABS
|
| Weight |
160 g
|
| Type |
none
|
|---|
| Battery life |
200 h
|
|---|---|
| Battery life description |
200 hours with 1800 mAh alkaline batteries
|
| Battery type |
Battery 3x AA alkaline
|
| Power consumption |
< 0.02 mA, with instrument off
|
| Connection |
8-pole male DIN45326 connector
|
|---|
| Display presence |
Yes
|
|---|---|
| Description |
2 x 4½ digits plus symbols
Visible area: 52 x 42 mm |
| Type of controls |
Button
|
| Display type |
LCD
|
| Certificate |
CE Declaration: Declaration of conformity required where applicable under EU legislation. Manufacturers declaration, nessasary for selling to european market. Requires -prodcut depending-, fulfillment of regulation, like RoHs, LVD, EMC, ATEX, product related |
|---|---|
| Standard / Compliance |
RoHS: Restriction of Hazardous Substances compliance. Manufacturers declaration of compliance to regulation, company/site related REACH: Compliance with REACH requirements for substances and SVHC information. Manufacturers declaration of compliance to regulation, company/site related |
| Compliance Requirement |
EMC directive: Electromagnetic Compatibility LVD directive: Low Voltage directive |
SICRAM module PP471 is required to connect TP704 and TP705 probes.