For very hot measurement points, this Bunsen burner probe gives users a direct way to measure temperatures up to +1550 °C. The probe tip may be exposed directly into the flame, making it suitable for demanding high-temperature work where a standard probe would not be appropriate.
The type S thermocouple (Pt10Rh-Pt) covers +50 ... +1550 °C and responds quickly, with an approx. 2s T90 response time. A V4A tube with Ø 8 mm diameter, reduced Ø 5.5 mm ceramic tube, plastic handle, silicone cable and miniature flat plug provide a practical configuration for Bunsen burner temperature measurement. Loose ends and a 3 m cable are available as non-default options.
The probe uses a type S (Pt10Rh-Pt) thermocouple for temperature measurement from +50 ... +1550 °C.
The design combines a V4A tube with Ø 8 mm diameter and a reduced Ø 5.5 mm ceramic tube at the probe section.
The probe includes a plastic handle and silicone cable (1 m standard length) for handheld use in the stated temperature application. A 3 m cable is available as a non-default option.
The standard connection uses a miniature flat plug. Loose ends are available as a non-default option.
| Measuring principle |
Thermocouples
|
|---|---|
| Temperature sensor |
Type S, Class 1
|
| Temperature range TC S |
50...1550 °C
|
| Response time (T90), analog output (passive) |
2 s
|
|---|
| Cable |
1 m Silicon
|
|---|---|
| Connection |
Miniature flat pin plug
|
| Probe Diameter |
8 mm
|
| Handle |
Plastic
|
| Probe length |
80 mm
|
| Material |
Ceramic, AISI 316 stainless steel
|
