Flow switch for water with adjusted switching point

G

Flow switch for water monitoring with adjusted switching point, DN 8 to DN 15, G 1/4 to G 1/2 female thread, PN 16, Reed switch, IP 65 protection and optional DIN 43650-A / ISO 4400 plug.
Product Inquiry

Introduction

Low-flow monitoring needs a clear signal before a process runs dry or leaves its intended operating window. This flow switch gives users a compact switching solution for water applications, with a factory-adjusted switching point and sizes from DN 8 to DN 15 for horizontal flow installation.
 
The switching principle is simple and robust: magnet-equipped balls move with the flow against the magnetic force of an opposing magnet and actuate a Reed contact. The device is designed for PN 16, media temperatures from -20...+80 °C and ambient temperatures from -20...+70 °C, making it suitable for many industrial water monitoring tasks.
 
Installation stays practical with female thread connections from G 1/4 to G 1/2 and a standard PG11 cable gland. Ingress protection (IP65) supports use in demanding environments, while the optional DIN 43650-A / ISO 4400 plug gives additional flexibility for electrical connection.

Adjusted switching
Adjusted switching
Factory-adjusted switch point supports reliable flow monitoring in water applications.
Compact low-flow use
Compact low-flow use
DN 8 to DN 15 sizes cover small lines with G 1/4 to G 1/2 female threads.
Industrial pressure fit
Industrial pressure fit
PN 16 pressure resistance supports use in many process water circuits.
Protected connection
Protected connection
IP 65 housing protection with standard PG11 cable gland for industrial environments.

Features

Magnetic ball principle
Balls fitted with magnets rise in proportion to the flow against the magnetic force of an opposite-poled magnet and actuate a reed contact.
Reed switch output

The standard switching function is an opener contact rated up to 250 V AC, 1 A and 50 VA for ohmic loads.

Threaded process connection

The standard versions use female threads in G 1/4, G 3/8 or G 1/2, matched to DN 8, DN 10 or DN 15.

Product inquiry

All fields marked with * are required. Product specific information are filled in automatically.

Drag files here or

PDF, PNG or JPG file, in total max. 20 MB

Please check the automatically filled product information before sending your inquiry. Attaching relevant documents helps us process your request faster.